1. Adopting an integrated high-strength cast body with stress relief to ensure long-term accuracy.
2. The three circular guide column slider structure adopts alloy steel lining, combined with forced lubrication, to minimize heat and achieve the highest accuracy.
3. The human-machine interface (electronic cam+rotary encoder) is easy and accurate to operate.
4. Fully intelligent PLC control, electric mode adjustment, overload hydraulic protection; Variable frequency adjustment and automatic oil cut-off alarm device; Electronic digital display module with high memory function, optional hydraulic locking and lifting automatic device.
Application scope
Used for light industrial products such as locks, lighting fixtures, and hardware products; Electronic products: processing of fine wire components such as mobile phones, computers, and tablets;
|
Project |
Item |
DPH-25 |
DPH-45 |
|
|
Nominal force |
Nominal Capacity |
Ton |
250 |
450 |
|
Long itinerary |
Stroke |
mm |
20 25 30 |
25 30 40 |
|
Number of trips |
Stroke Per Minute |
s.p.m |
200-1000 200-900 200-800 |
200-800 200-700 200-600 |
|
Maximum closed working height |
Die Height |
mm |
185-215 183-213 180-210 |
213-243 210-240 205-235 |
|
high society |
Bolster Area |
mm |
600×300×80 |
680×420×90 |
|
slider |
Slide Area |
mm |
320×220 |
420×320 |
|
Slide Adjustment |
Slide Adjustment |
mm |
30 |
30 |
|
Material drop hole |
Bed Opening |
mm |
100×300(400) |
100×400(500) |
|
Motor |
Motor |
HP |
5 |
7.5 |
|
Total |
Gross Weight |
kgs |
2919 |
5080 |
|
Circulatory system |
Lubrication System |
Foreceful Automation |
Foreceful Automation |
|
|
Transmission system |
Speed Control |
Lnverter |
Lnverter |
|
|
Clutch and brake |
Clutch﹠Brake |
Air﹠Friction |
Air﹠Friction |
|
|
Vertex stop |
Auto Top Stop |
Stand Dard |
Stand Dard |
|
|
Punching machine (left and right x front and rear x height) |
Presses Dimengsion |
mm |
1240×1260×2195 |
1300×1415×2525 |
|
Project |
Item |
DPH-65 |
DPH-85 |
|
|
Nominal force |
Nominal Capacity |
Ton |
650 |
850 |
|
Long itinerary |
Stroke |
mm |
25 30 40 50 |
20 30 40 50 60 |
|
Number of trips |
Stroke Per Minute |
s.p.m |
200-800 200-700 200-600 200-500 |
200-600 200-500 200-400 200-300 200-300 |
|
Maximum closed working height |
Die Height |
mm |
209-259 206-256 200-250 196-246 |
320-370 315-365 310-360 305-355 300-350 |
|
High society |
Bolster Area |
mm |
890×520×110 |
1000×600×150 |
|
Slider |
Slide Area |
mm |
550×350 |
700×450 |
|
Slide Adjustment |
Slide Adjustment |
mm |
50 |
50 |
|
Material drop hole |
Bed Opening |
mm |
100×450(550) |
170×600(700) |
|
motor |
Motor |
HP |
15 |
30 |
|
total |
Gross Weight |
kgs |
8016 |
14500 |
|
circulatory system |
Lubrication System |
Foreceful Automation |
Foreceful Automation |
|
|
Transmission system |
Speed Control |
Lnverter |
Lnverter |
|
|
Clutch and brake |
Clutch﹠Brake |
Air﹠Friction |
Air﹠Friction |
|
|
Vertex stop |
Auto Top Stop |
Stand Dard |
Stand Dard |
|
|
Punching machine (left and right x front and rear x height) |
Presses Dimengsion |
mm |
1700×1750×2910 |
1640×2050×2970 |
|
Standard Accessories |
|
|
Top Stop |
● |
|
Manual Slide Adjusting Device |
● |
|
Die Height Indicator |
● |
|
Frequency Inverter |
● |
|
Programmable Logical Controller |
● |
|
Touch Screen Device(Preset Counter,Angle Indicator Included) |
● |
|
Encoder(Electrical)2 Set Obligate |
● |
|
Operation Cabinet At The Front Of Franme |
● |
|
Air Outlet |
● |
|
Sticking Release Device |
● |
|
Main Motor(Adjustable) |
● |
|
Hydraulic Die Locking Device |
● |
|
Mechanism Crank Angle Indicator |
● |
|
Circulated Lubricantion System |
● |
|
Tool Box |
● |
|
User Manual |
● |
|
Power Supply |
● |
|
Separate Control Cabinet |
● |
|
Standard Accessories |
○ |
|
Anti Vibration Press Mount |
○ |
|
Feeder |
○ |
|
Rack |
○ |
|
Material Lubrication Device |
○ |
|
B.D.C.Detector |
○ |
|
Oil Cooler |
○ |
|
Die Room Light |
○ |
|
Air Ejector |
○ |
Conclusion
Press braking, stamping, and roll forming are effective metal processing methods in the sheet metal industry, each with distinct advantages and disadvantages. Stamping machines, roll forming machines, and press brakes are commonly used in the industry.
DONGXIONG GROUP is a professional manufacturer of mechanical presses, hydraulic pressespress brakes, laser cutting machines, and shearing machines, with years of experience. Our range of press brakes includes CNC press brakes, NC press brakes, and tandem press brakes. For more information, visit our website or contact our sales team.
Factory display
Hot Tags: uninsulated ring terminals, China uninsulated ring terminals manufacturers, suppliers, factory, Industrial Stamping Press, Metal Stamping Tooling, Metal Stamping Equipment, Tinned Copper Ring Terminal, Stamping Machine For Sheet Metal, Sheet Metal Stamping Dies
