Description

Technical Parameters

Closed single axis high-precision steel frame punching machine DPS-W punching machine series

1. High rigidity mode structure, designed according to the requirements of heavy-duty presses, has excellent resistance to heavy load stamping, small deformation of the body, and is suitable for red stamping products with fluctuating stamping tonnage.

2. Eight sided guide rail effectively eliminates eccentric load displacement, with high guiding accuracy, good straightness, long mold service life, and good concentricity of stretched products.

3. Enclosed gearbox significantly reduces noise, with gears submerged in oil and a long service life.

4. Closed pneumatic clutch, with sensitive action, smooth engagement, accurate stopping angle, can stop at any angle, easy mold installation, and safety.

5. The equipment specially developed according to the production requirements of copper nose has the advantage of high efficiency in the use of manual automatic production lines.

Stamping Product 1

Stamping Product 2

Stamping Product 3

Stamping Product 4

Stamping Product 5

Stamping Product 6

Name	Unit	DPS-125W		DPS-160W		DPS-200W
Nominal force	KN	1250		1600		2000
Type		V	H	V	H	V	H
Slide stroke	mm	230	160	250	200	250	200
Rated toque journey	mm	8	4	10	6	10	6
Number of trips (fixed speed)	s.p.m	45	70	40	60	40	60
Maximum mold height	mm	320	350	325	350	365	390
Adjustment of mold height	mm	80		100		110
Lower workbench size	mm	750×700×105		800×750×115		800×800×115
Bottom surface of slider	mm	750×450		780×500		800×650
Bore in worktable	mm	Ø250		Ø320		Ø320
Handle hole	mm	Ø75		Ø75		Ø75
Main motor	KW×P	11×4		18.5×4		18.5×4
Pull rod size	mm	M30×550		M30×620		M36×600
Use air pressure	MPa	0.5-0.7		0.5-0.7		0.5-0.7
Punching machine (front and back x left and right x height)	mm	1742×1623×3400		2030×1886×3845		2290×1891×4032
Punch weight	Ton	10		14		16

DPS-250W		DPS-315W		DPS-400W		DPS-500W
2500		3150		4000		5000
V	H	V	H	V	H	V	H
250	200	250	200	250	200	250	200
15	8	15	8	15	8	15	8
40	60	40	60	40	60	40	55
400	425	420	445	425	445	450	475
120		120		150		150
900×850×135		950×900×155		1100×1000×175		1200×1100×195
920×750		970×800		1100×800		1200×900
Ø320		Ø320		Ø320		Ø350
Ø75		Ø75		Ø75		Ø100
22×4		30×4		45×4		55×4
M36×650		M36×700		M36×900		M42×950
MPa		0.5-0.7		0.5-0.7		0.5-0.7
2798×2086×4150		2819×2156×4670		3259×2226×5027		3527×2630×5600
19		25		32		38

Standard accessories	Select configuration
Pneumatic clutch	Pneumatic cushion device
touch screen	Foot switch
Pre load counter, pre break counter	Sliding block upper feeding device
Hydraulic overload protection device	Shockproof feet
Misdelivery detection device	Photoelectric protection device
Power supply socket	Feeding machine (air, mechanical, and NC types)
Electric butter lubrication device	Material rack
Electric slider adjustment device	Leveling machine
Electronic high modulus display	manipulator
Sliding block and mold balancing device	Mold lighting device
Electronic rotary cam switch
Crankshaft angle indicator
Frequency converter
Counter
Air source connector
Secondary protection household device
an instruction manual

Servo electric cylinders, as precision control equipment, play an important role in modern industrial automation. Proper maintenance is crucial to ensure its long-term stable operation and extend its service life. This article will introduce how to effectively maintain servo electric cylinders to improve their work efficiency and reduce the occurrence of faults.

DPS-200T

Stairs

Adjustment Plate

Pressure Regulating Valve

Regular inspection and cleaning

During long-term use, servo electric cylinders are prone to accumulate dust and dirt, which can affect the normal operation of the equipment. Therefore, regular inspection and cleaning are the foundation of maintenance. It is recommended to conduct an external cleaning of the electric cylinder once a month to ensure that there is no accumulation of dirt on the guide rails, sliders, and other components. In addition, regularly check the wiring and interfaces of the electric cylinder to ensure that there are no loose or damaged situations.

Lubrication and maintenance

Lubrication is crucial for the smooth operation of servo electric cylinders. According to the frequency of use and working environment of the electric cylinder, regularly add an appropriate amount of lubricating oil to reduce friction and wear. Normally, it is recommended to perform lubrication and maintenance every three months. When lubricating, it is necessary to choose a suitable lubricant and ensure that it is evenly applied to the guide rail and screw. At the same time, avoid excessive lubrication to prevent lubricant leakage from affecting the operation of the equipment.

Monitor the operational status

It is crucial to regularly monitor the operating status of servo electric cylinders in order to detect potential problems in a timely manner. The working condition of the device can be determined by monitoring parameters such as current, voltage, and temperature. Once an abnormal situation is detected, such as excessive current or temperature rise, the machine should be stopped immediately for inspection to prevent further damage. In addition, attention should be paid to the noise changes of the electric cylinder during operation, as abnormal noise may indicate wear or looseness of internal components.

Regular calibration and debugging

The accuracy of servo electric cylinders may deviate after long-term use, so regular calibration and debugging are required. Especially in applications that require high precision, regular calibration can ensure that the equipment remains in optimal condition at all times. It is recommended to conduct a comprehensive inspection and debugging every six months, and if necessary, hire professional personnel to operate to ensure the accuracy and stability of the equipment.

Proper maintenance of servo electric cylinders can not only extend their service life, but also improve production efficiency and reduce failure rates. By regularly checking and cleaning, lubricating and maintaining, monitoring the operating status, and calibrating and debugging, it can be ensured that the servo electric cylinder is always in good condition. Any equipment in industrial production requires careful maintenance, and servo electric cylinders are no exception. Only by doing a good job of daily maintenance can its performance be maximized and reliable guarantees be provided for production.

Frequency Converter

Motor

Electric Box

Hot Tags: closed die forging machine, China closed die forging machine manufacturers, suppliers, factory, Stamping Press, Industrial Metal Stamping Machine, Automatic Sheet Metal Punching Machine, High Speed Press Machine, Metal Forging Equipment, 0 Gauge Copper Ring Terminal

Closed Die forging Machine